2020. 12. 4. 01:08ㆍ카테고리 없음
It seems to be more concerned about the Z coordinate not being set to zero than anything, but at least it lets you know that this has been changed. Using the BASE command can be useful for when you have a series of blocks that are in a folder and each drawing is an individual blocks. Nvidia rtx demos. Why does AutoCAD insert my blocks in wrong scale?: Blocks and Xrefs contain their insertion unit settings, which are used for automatic scale conversion (rescale) when they are inserted/attached to a drawing using other units.These units are defined in the INSUNITS (default units), INSUNITSDEFSOURCE (source units) and INSUNITSDEFTARGET (target units) variables.
Autocad Blocks Not Inserting Correctly File
Issue:
Causes:
- The drawing might be set up in different units than expected.
- The geometry was originally draw at the wrong scale.
- One of the system variables for scaling inserted objects may need to be changed to get desired results.
Solution:
- To check that the drawing units for the receiving drawing are correct, use the -DWGUNITS command and follow the prompts.
- Check check the dimensions on the original file using the DIST command for consistency with the dimensions.
- There are three system variables (INSUNITS, INSUNITSDEFSOURCE, and INSUNITSDEFTARGET) that control the insertion scale for blocks, xrefs, and raster images. Inserted objects should be automatically scaled to the units of the host file. Files that are created with different units will be converted to the units specified in INSUNITS if your files have been configured correctly. For example, a file drawn in millimeters will be automatically scaled to meters when inserted into a drawing that is setup for meters. Check that INSUNITS is set accurately. If the units are not specified correctly in all involved files, automatic scaling will not work as anticipated.
To deactivate automatic scaling of inserted objects:
- At the command prompt in AutoCAD, enter INSUNITS.
- Repeat this for INSUNITSDEFSOURCE and INSUNITSDEFTARGET.
Detailed information about these variables and their possible values can be found in the AutoCAD Help file.
Note: The INSUNITSDEFSOURCE and INSUNITSDEFTARGET set the source file units value only when INSUNITS is set to zero. https://omnaceven.tistory.com/4.